Need Support? Let’s guide you to the right answer or agent.

OpenRoads Ideas Portal

ADD A NEW IDEA

All ideas

    Bring back "Depends On" in the Properties

    It is my understanding that this was removed in the 2024 version due to general confusion, but I'd like it to be added back. If it is made toggleable, it can be turned off by default to avoid the aforementioned confusion, and this allows those tha...
    over 1 year ago in Geometry / OpenRail Designer / OpenRoads Designer / User Interface 0 Future consideration

    Labels Every 100' and Ability to Pick Start Point

    I created the Civil Label for the 100’ elevation along a geometric element, but I want to be able to pick where the labeling starts and not at the start of the geometric element. I want to establish a target to start the 1st label at a prompted cl...
    over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer 0 Future consideration

    Needs ability to set RIM Depression Depth

    Needs ability to add RIM Depression Depth with elevation (ground). Currently we can only set the Elevation (RIm) but not any depression value.
    almost 4 years ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration

    Create a tool to clip alignments.

    Create a tool to clip an alignment at any location along the alignment that does not affect or change the stationing or the station equations even if you are clipping the beginning of the alignment.
    about 3 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration

    Wind load application on individual girder during construction/Initial Stage in Leap Bridge Steel

    AASHTO Construction Guide Spec and some DOTs do require wind load during construction (Initial Stage in LBS) to be applied to all girders erected like below screenshot. Would it be possible to include feature in LBS to allow force/moment load effe...
    8 months ago in OpenBridge Designer 0 Future consideration

    Trench drain

    Currently there is no easy way to model a trench drain which would be an inlet with dynamic length , we need inlet cells with parametric dimensions for width and length this could work well with trench drains and flumes to adjust to different side...
    8 months ago in Drainage and Utilities / OpenRoads Designer 0 Needs review

    Select Multiple Annotation Definitions Simultaneously While Building Annotation Group

    While building an Annotation Group, Annotation Definitions have to be selected one at a time in a temporary window. Make the definition selection window persistent, and allow multiple definitions to be simultaneously selected for addition to the a...
    almost 2 years ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

    Checkbox to turn on-/off alignments

    It would be useful to be able to turn on-/off single alignments. Perhaps with a checkbox in the "OpenRail Model" section in the explorer, just like the ones in the "Feature definition" section in OpenRail Standards. This could probably be handy wi...
    about 3 years ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / User Interface 0 Future consideration

    Allow Item Type value to drive dimension of Civil Geometry elements

    There are several instances where we draw civil elements with rules and need to change the dimension value (length, offset from element, etc.). Currently the only way to do this is to click on the element and use the handles, or dig through the pr...
    over 2 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

    Export Corridor to IFC with Named boundary Group

    Needs ability to bring back the option when Export Corridor to IFC with Named Boundary Group in future versions of ORD This feature is removed in 23.00.00.129 version but present in all previous version of ORD
    over 2 years ago in Import/Export / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Already exists