Options within the software for managing imported regression points in line with the tolls we previously had in powerRail Track.

In annotation group we can manage annotation at interval (even of) and at points where we have POB/POE. But it is not possible to ignore point of start and/or Point of end when annotation at regular interval. We can skip some specific interval usi...

One issue I've found with the trace slope is that the direction is adjustable (can be down or up) and ORD isn't smart enough to change the direction of the line. This causes two issues: 1) One of your flow directions is going to be wrong, dependin...

When inserting a vertex on a terrain using the edit tools, the vertex is put at 0 elevation (if outside the terrain) and at the terrain elevation (if inside the terrain) even if you snap to a 3D element. The current workaround requires moving the ...

When we create cross sections for culverts, the cross section often needs to be created at a skew from the centerline. We are able to create these using the 2 Points option. This option, however, is limited. We would like for our cross sections to...

When the bridge needs a long “wingwall”, it break two part – a wingwall which is built with the abutment, and the rest part I call it “Retaining wall”. Is it possibly to make this retaining wall as easy as wingwall? That means like put the wingwal...

In InRoads, multiple alpha codes assigned to a single Feature all shared the same custom codes and other survey settings. Having to duplicate any VBA Feature Macros to every alternative Alpha Codes complicates maintenance and is a source of uninte...

When setting up terrain filters, there is a substantial amount of effort required in multiple dialog boxes. I had created a report for InRoads that created the XML codes needed for its Terrain Import tool's preferences using an XIN file as its sou...

Add an option to get camber given at 10th points on the clbrg span instead of the precast span. beams are being set at a certain elevation at CLBRG so the camber up from CLBRG is what we need to design geometry around, not camber up from end of pr...

Add an option to show cut and fill graphics in the profiles or an option which can auto hatch the areas. Please refer to attached Snapshot.