ORD needs the ability to project multiple scenario's hydraulic grade lines onto the centerline geometry. Profiles are often displayed along the centerline for drawing production. We need to display the 10, 25, 100-yr, etc. HGL lines onto this proj...

Today we must do a station offset report in order to get existing elevation from the active terrain model. It is even not possible anymore (2026) to use the alignment as the baseline and the offset feature.The basic horizontal geometry report shou...

I would like the ability to create a report definition via some other method and import it in, similar to the functionality that exists for Item Types. I assume Excel, but it doesn't have to be. Once I found out I can import Item Types from an Exc...

High-profile bridge projects often require specialised analyses, for example in the field of wind engineering, that go beyond the capabilities of commercial software, including RM Bridge itself. Nevertheless, we use RM Bridge for our general globa...

My agency uses a lot of semi-integral abutments. in this type of abutment, the girders extend over the abutment wall and are locked together with a large end diaphragm block that also provides the pavement seat for the approach slab. I have provid...

To enhance productivity and efficiency in live projects, we need dynamic Named Boundaries linked to Geometry. This includes the ability to update the shape or location of a named boundary after creating a sheet model, with the changes reflected in...

My agency uses girder stops at abutments and expansion piers. These act as guides that allow the girders to move freely during expansion, contraction, and seismic events without falling off the bearings. Modeling these would allow for more accurat...

When drawing on a plane, such as for vertical bridge work. all that information can be quickly projected/ transferred to a new plane/profile. This would keep all pertinent information and constraints fixed in space. or if desired that information ...

OBD / RMBridge - Shear Capacity Calculation As per AASHTO 10th edition

Summary: When users turn levels off in the Default 3D models, that display state does not carry into cross section drawing/sheet models without opening them more than once. This creates unexpected sheet output where items that are intentionally hi...