OBM has the option to create a deck elevation report parallel to start of the support or normal to the alignment. Bentley should include the option to find the elevation and station of the bent traverse line to not intersect with the railing lines...

Sometimes when a drawing view/model is generated and annotated etc. you realize that you want to make a slight tweak to one of the standards (annotation group for example) but you cannot simply just open explorer and make the change if you are in ...

Sometimes we need to have larger models for large projects to maintain flow continuity.

In Geopak, there was a tool under DTM Tools > Analysis > Volumes, where you could specify elevation ranges to calculate the volumes, while also taking into account the volumes between two TINs. You were able to specify multiple contour inter...

We want to place only one cross section per sheet so that once a pdf is created, the user can flip through the pdf pages quickly and each cross section appears in the same spot. We can sort of trick this by changing the spacing, but it would be mu...

Terrain filters have the ability to use the Feature Definition, but a lot of the time we have elements that we do not want all elements of a feature definition to be captured by the terrain filter. Our current workaround is to have multiple versio...

The DIST Command in Open Roads is almost identical to the InRoads version with one problematic exception. Open Roads uses the last two actual shots to determine the direction to turn the 90-degree angle to generate its points. InRoads would allow ...

A functionality in the Regression Points Table, particularly for deleting the points are missing in this table. The current workaround is to navigate through Explorer and delete the regression points, one by one, which is an issue if you have many...

I get close to 40-50 rows of data when I assign a "pond" to a terrian. I only need data every 0.1ft but it is providing much more.

Editing the location of an intersection point by just clicking and moving it was possible in PowerRail track - can we have that functionality back as it's a good tool to quickly see changes in alignment when optioneering.