Need Support? Let’s guide you to the right answer or agent.

OpenRoads Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1500

Revise Limitation to LEAP/RC-Pier Wind Load Auto Generation Tool

I have brought the limitation to the Wind Load Auto Generation tool in the past, but this is becoming more important and an issue now, since I’ve been getting many comments from our clients and my coworkers on this. Currently, the wind load auto g...
about 1 year ago in OpenBridge Designer 0 Future consideration

Enable a screen-pick option when entering XY coordinates within the Survey Details window

With Inroads Survey, whenever XYZ coordinates needed to be entered for a particular purpose, a screen-pick option was always available. (see attached image) This was extremely useful. However, with ORD, changing the XYZ coordinate of any points in...
about 2 years ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Future consideration

Add columns for conduit construction length and constuction slope to flex table

Is there a way to add constructed length and constructed slope to a conduit flex table? I can build annotation for these fields for plan production, but I haven't found these fields to add to a conduit flex table. This would allow for more options...
about 2 years ago in Drainage and Utilities 0 Already exists

Limit the types of models that can have coordinate systems

Would be nice if the non-indexed profile models and cross section models prevented users from being able to assign coordinate systems. Also would be nice if coordinate systems weren't able to be attached to sheet models either. Since coordinate sy...
about 1 year ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer / OpenSite Designer / OpenTunnel Designer 0 Future consideration

Add loading options in LEAP Concrete (Previously known as RCPIER)

Provide an option to enter girder properties for both the back span and fwd span if varying girder properties between back and fwd span When generating moments due to braking force, provide an option that distributes the moment divided by 10 and a...
about 1 year ago in OpenBridge Designer 0 Future consideration

Text Favorites for Start/End Station and Start/End Offsets of Plan and Profile Lines

When working with plan elements or profile elements, I often find myself needing to find the Start Station and End Station of a line element or a profile element. A text favorite would be useful for placing text for this information as annotation,...
7 months ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

ORD Design File Settings>Working Unite>Resolution change tool

Is there a tool in ORD that can change the Design File Settings>Working Unite>Resolution and scale the model so that the model remains at the correct scale after the resolution change. Is there such a tool? If not, that is my design enhancem...
7 months ago in Modeling / OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer / OpenSite Designer / OpenTunnel Designer 2 Future consideration

Clip Conduits (pipes) at inside edge of Drainage Structures and Report "True" Horizontal Lengths and Vertical Lengths in the Properties

This is more than useful; this is absolutely required. When laying out Drainage Networks, pipes need to be trimmed at the inside edge of the structures, and the "True" pipe lengths (horizontal & vertical) need to be provided in the properties....
7 months ago in Drainage and Utilities / Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 5 Already exists

Import multiple DGN references simultaneously

A way to reference in multiple DGNs simultaneously. At the moment if I bring in 50 DGNs I have to click OK 50 times. There should be a way to apply reference settings to all and select reference all with one click.
over 1 year ago in OpenRoads Designer 2 Already exists

Add toggle for static labeling for contours using element templates.

Allow dynamic labeling to be turned off for contours so that contour deliverables can be generated for clients who do not use openroads. When working with a large area the dynamic labels are too large when using extract contours because you have t...
about 2 years ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer / OpenSite Designer / Terrain 0 Already exists