Need Support? Let’s guide you to the right answer or agent.

OpenRoads Ideas Portal

ADD A NEW IDEA

Turnouts/Crossings

Showing 6

Modify the LLS part when placing a turnout.

Currently one could add an LLS part on a turnout. Unfortunately this is a standard value. Sometimes, when creating a horizontal geometry, it is necessary to ''shorten'' the LLS part (aka to place a fewer amount of long sleepers that a standard LLS...
11 days ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Enhancement::Additional Tool for Design of Cross over connection between Tangent & Canted Tracks

I suggest improvements to Bentley OpenRail Designer for handling Cross over connections in the following scenarios: Cross over Between Adjacent Tangent Tracks: Enable a simple geometric connection between two parallel tracks without the use of Geo...
6 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Turnout profile elevation in reports

We need the ability to get the profile elevation from the turnout points to the turnout report.
8 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Verify Turnout

Use the Geometry Connector with start and end elements chosen as turnouts. The converged result gives a disconnection between the regression alignment and the turnout. You can only discover it by zooming in to the closest possible view. A "Verify ...
about 1 month ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Include info about side/hand of turnout from the tip of the turnout (Point 1) looking towards the toe (point 2)

Especially in reports but also in models we need to add information about turnout type including a letter showing towards which side looking from point 1 towards point 2, the branch is oriented. As it is now turnouts with Leading orientation will ...
5 months ago in Turnouts/Crossings 0 Needs review

Need to annotate partial alignment lengths along turnout from point of switch to start/end

Users need a way to annotate the same way SS2 would annotate with the Switch Height Plan command. Partial lengths along the alignment need to be annotated, but there is not a way to do this in OpenRail. The workaround is to create a dummy alignmen...
about 1 year ago in Annotation / OpenRail Designer / Turnouts/Crossings 0 Needs review