Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

Superelevation

Showing 18

Add point of reverse curvature on reverse parabolic transition

In the Superelevation Editor, being able to add a point of reverse curvature on reverse parabolic transitions will help when trying to manually define/adjust points of 0% cross slope.
4 months ago in OpenRoads Designer / Superelevation 0 Future consideration

Add superelevation point type of "crown removed"

In the Superelevation Editor, adding a "crown removed" option to the Point Type list would help when trying to manually define/adjust anywhere there is 0% cross slope.
4 months ago in OpenRoads Designer / Superelevation 0 Future consideration

Apply superelevation to Linear Templates

I have built a civil cell using linear templates. The civil cell will need to have superelevation applied to it. Currently I cannot apply superelevation to the linear templates, and I cannot use a corridor within my civil cell without other issues...
5 months ago in OpenRoads Designer / Superelevation 0 Future consideration

Superelevation Frame Annotation Enhancements

Please consider the following enhancements for the profile frame annotation which is currently difficult to understand and lacks important functionality: Preview window should display an example superelevation diagram instead of remaining blank an...
6 months ago in Drawing Production / OpenRoads Designer / Superelevation 0 Future consideration

Allow user to define width of superelevation section graphic.

Currently, the graphic representing the superelevation section is hard coded to use the radius of the smallest curve in the alignment. If the radius of the smallest curve is 50 meters or more, the section width is hard-coded to 50 meters. If t...
6 months ago in OpenRail Designer / OpenRoads Designer / Superelevation 0 Future consideration

Superelevation lanes have start and end points by default in tangents

Currently if you place a superelevation lane on a tangent alignment, no points will show up in the superelevation editor. I would like that automatically even in tangent sections, the start and end points are placed in the superelevation editor so...
6 months ago in OpenRoads Designer / Superelevation 0 Future consideration

Import Superelevation allows beyond limit of Super Section

I would like to request a feature that prevents or warns about applying transitions to lanes that go beyond the station limit of the superelevation section when using the “Import Superelevation” tool. This is because this situation can cause poten...
10 months ago in Import/Export / OpenRoads Designer / Superelevation 0 Future consideration

Assign Superelevation to Approach Slab

The ability to Assign Superelevation to Approach Slabs would be good. If I use the Sync with Deck that does bank the approach slab but also extends the edge of the approach out to the fascia of the Bridge. Typically, our approach slab extends only...
10 months ago in OpenBridge Designer / OpenBridge Modeler / Superelevation 0 Future consideration

Superelevation Rounding

Can there be added functionality to force rounding up rather than just being a standard rounding of what is set in the superelevation file editor? As it sits currently, if your rounding is set to 1, if a curve meets a value between 0 and .5 the su...
11 months ago in OpenRoads Designer / Superelevation 0 Future consideration

Allow Parametric Constraints to Override Rollover Slope

As an OpenRoads Designer user, I want parametric constraints to be allowed to override Rollover slopes to make it easier to apply constraints to the corridor and template models.
11 months ago in Modeling / OpenRail Designer / OpenRoads Designer / Superelevation 1 Future consideration