Currently, for abutment and piers, when battered piles are used in combination with an embedment length, the pile location is set based on top of pile not the bottom of footing. When users input pile spacings into the pile layout dialog, it is not...

It would be beneficial to project multiple profiles that are parallel to each other in one profile grid. For instance, one for Left front face of a curb, another for Construction Centerline, and another for Right front face of curb.

You can't use the Analyze Point tool on read-only files presumably because it is trying to add annotation but sometimes people just want to check measurements such as slope between geometry in a read-only files and this is a very useful tool to do...

Currently OBM requires atleast two beams in the beam layout. Users working on bridge expansion projects, or with rail bridges have requested allowing bridges with a single beam.

Users should be allowed rename the Bearing group names and the individual bearings in a group.

Currently concrete beam tops are drawn straight across along the length of the beams. Allow the users to specify a camber value at middle and draw the beams curved.